Category Archives: Accessories

Machine Embroidery Hooping Tips

Christmas Stockings! Designed by:Jenny Gabriel Sewn Out by: Liz Taylor

Sometimes achieving perfect placement for machine embroidery can be tricky.  So, here’s a few tips that may help you with your next project:

Placement is usually easiest if you can decide exactly where on your fabric that you want the design.  The green fabric shown is going to become an embroidered Christmas stocking cuff that says, “Daddy”.  Placement is key for a nice project.

We made a stocking cuff pattern piece/embroidery placement template to make sure we get this right.  Our pattern piece has an embroidery design placement cross hairs marked on it to help us see where the “Daddy” will end up.

Hooping & Placement Tips:

Step One:  Use a design template whenever possible

Step Two: Place the template on your fabric

Step Three:  Place your plastic hoop grid (that came with your machine) on your template and align the center cross hairs of the hoop grid with the template’s cross hairs.  We do this just to make sure we’ve got enough of a fabric border around the hoop grid (at least 1/2″) to be able to hoop the fabric.  (see picture above)

Step Four:  Place embroidery stabilizer under the fabric.  (Make sure the stabilizer is beneath the area that will be embroidered.)

Fabric Marking

Step Five:  Use a placement sticker or use a fabric marking tool to mark the design’s cross hairs onto your fabric.  We folded the paper back along the cross hair vertically and marked the vertical line.  Then we folded the paper back along the cross hair horizontally and marked the horizontal line.

Embroidery Placement Mark

Step 6:  Once your fabric is marked, place your plastic hoop grid in your inner hoop.  Lay the inner hoop on top of your marked fabric aligning the hoop grid cross hairs with your marked cross hairs.

Step 7:   Now, everything is perfectly aligned and if you can just snap it into your outer hoop without the fabric shifting, you’ll have everything aligned as needed.  To prevent shifting, we like to wrap the stabilizer and fabric around the edge of the inner hoop and grasp firmly as we position it and lay it into the outer hoop.

Step 8:  Next, tighten the hoop screw.

Step 9:  If the fabric is loose or kind of ripply in the hoop, you can gently tug it (be careful not to tug harder on one side than the other) to help it spread out evenly and tightly in your hoop.  (Be careful how you tug the fabric or you’ll pop it right out of the hoop and/or possibly mis-shape it).

Step 10:  Snap your hoop onto your machine.  Remove the plastic hoop grid.  Align the needle with your marked cross hairs and embroider your design.

Step 11:  Once your design is stitched out, remove your fabric from the hoop and press if desired.

Step 12:  The neat thing about using templates is that they also help you know where to place your pattern piece to cut out your fabric.  After we embroidered, we then laid our cuff pattern piece onto our fabric again and used the template cross hairs to make sure we had “Daddy” in the right place before we pinned the pattern to fabric and cut out the cuff.    After that, we assembled our stocking according to the pattern instructions.

I hope you found this useful.   These are my “go to” steps for successful embroidery placement in projects.

Thanks for reading!

By the way, I have created the pattern and typed up illustrated sewing instructions for these stockings.  The first 3 people to request a free copy of this project can have it!  Just post your comment here and I’ll leave it for you at Humble Sewing Center.

1. Tina Tran

2. Evonne Cobb


Let’s get sewing!

Jenny Gabriel – alter ego:  StitchinJenny

Tutorial: Personalized Mug w/ Embroidery

Personalized Mugs Make a great gift!

One of the very first things I learned to do with my embroidery machine was this quick and easy project when I attended an embroidery class at Humble Sewing Center with Instructor:  Marje Agostini.

FYI:  She’s pretty much an embroidery guru, so if you ever get the chance to attend one of her monthly Inspiration classes – you’ll have a good time, get more comfortable using your machine, and learn some neat tips & tricks for machine embroidery.

Ok, back to the mugs!  In the picture, the mug on the right was done using Marje’s instructions, except I decided to use fabric instead of kiwi paper.  If you decide to make one with fabric, just be sure to use a medium to heavy weight, fusible, cut-away permanent stabilizer.  Fuse it to the wrong side of your fabric before stitching and your fabric will behave just like the kiwi paper.

With permission, I’m posting Marje’s class instructions and a supply list for your review:

Supplies:  one 16oz. mug (available at Humble Sewing Center), one sheet of Kiwi Paper (at HSC), Peel ‘n Stick Stabilizer, Use a 4×4 or larger embroidery hoop,  16oz. Mug Template (attached to this blog post in a  link)

16oz.mug template

Note:  If you enjoyed this project and you want to order mugs in bulk, visit this link.  There is a $50 minimum order required.

Let’s Get Sewing!

Jenny Gabriel – alter ego: StitchinJenny

Jenny's Reversible Bag w/ Continuous Embroidery

Continuous Embroidery w/ Perfect Results!

Jenny's Reversible Bag w/ Continuous Embroidery 

Fully Reversible Bag with Continuous Machine Embroidery

Hello all!  I’m SewVac Outlet’s newest Guest Blogger, Jenny Gabriel, of  It’s a pleasure to chime in with some fun projects and tips/techniques to enhance your sewing!

This is my version of a bag that was inspired by a post on a blog called:  If you want the pattern, just visit this link!

I decided to make a few tweaks to the bag by enlarging it, adding an inset zipper, and the magic of continuous embroidery.

To be honest, I decided to take a minute and watch this very helpful video by Nancy Zieman, before doing my “experiment.”  Lots of good info here.  Enjoy!

Let’s Get Sewing!

Jenny Gabriel – alter ego:  StitchinJenny