Tag Archives: machine quilting

Hand Quilting by Machine with your Janome

Hand-Stitched By Machine

Would you liketo create the look of hand-work using your sewing machine? This technique is perfect for attaching a bias binding to finish a garment or craft project. A bias binding can be added to a skirt, top, and pants in place of the hem. If you use a contrasting fabric, or the same fabric, the look will different than the main part of the garment just because the fabric is cut on the bias. bias binding is a great finish for necklines and sleeves, too.

Supplies:
Bias binding (or bias strips from the same or contrasting fabric)
Adjustable Blind Hem “G” foot
Contrasting thread

Instructions:
1. Sew the right side of one raw edge of the bias binding to the wrong side raw edge of your project using straight stitch #1.
2. Fold the bias strip to the front side of your project. Pin in place.
3. Attach the “G” foot to the Memory Craft 11000.
4. Select Stitch Q #18.
5. Set stitch width to 3.0, length to 1.5.
6. Adjust the moveable guide on the “G” foot along the fold so that the straight stitch portion of the stitch lines up next to the outer folded edge of the bias strip. The left swing of the needle should pierce the bias strip.
7. Attach the bias strip in this manner along the entire area to be sewn, producing a hand-stitched look.

To create an invisible appliquè look, use matching thread or invisible thread.

The Janome “G” foot (also known as the “Blind Hem Foot”) fits most top-loading Janome models.

Hand Quilting Stitch
Janome MC11000 Stitch: Q #18
MC6600P Stitch M2 #36
Jem Stitch #40

* This technique can also be done on other Janome sewing machines, Babylock sewing machines, Viking machines, and othe brand machines. The stitch selection will depend on your specific model.

20110915-104337.jpg